Setting Device Owner Mode Using NFC
Supported OS: android.icon
Important:
- Factory reset and Wi-Fi connection is required to set up Device Owner Mode.
- Device owner mode using NFC cannot be set for devices that do not have NFC.
- Installing NFC Provisioner application is required.
You can easily set the device owner mode by sending the settings from the Android device with NFC.
Provisioning Device: the device has NFC Provisioner app
Target Device: the device to be Device Owner Mode
The Provisioning Android device doesn't have to be in Device Owner Mode. However, NFC Provisioner App must be installed and configured in advance.
How to set up Provisioning Device
1. Install NFC Provisioner application to Provisioning device. Download from here. Note: To install this application, please enable Unknown sources at Settings app > Security menu.
https://gyazo.com/dcecf5a2523c2bf916d8873de54e09bb
2. NFC Provisioner application is shown at application list on the device. Tap NFC Provisioner applicaton.
https://gyazo.com/8c8bf9195ca961f5d7ea05127ed459b2
3. Fill in “Enter the APK URL to provision:” and tap NEXT.
mdm.bizmo.in (Tokyo Region)
as-mdm.bizmo.in (Singapore)
https://gyazo.com/e5733bfc2e7e5e18afec97696eb8c15a
4. Setting up is completed once “You are now ready to bump!” on the screen.
https://gyazo.com/6af958235dc0b7f41145ff67b0b96e44
How to set up Target Device as Device Owner Mode]
Note:
- Factory reset and Wi-Fi connection is required to set up Device Owner Mode.
- Device owner mode using NFC cannot be set for devices that do not have NFC.
1. To perform factory reset, go to Settings > System > Reset options, and tap Erase all data (factory reset). And then follow the instruction on the screen. Device will reset and start the factory reset process.
2. Waiting some minutes to see Welcome screen. At this welcome screen, select language as English.
Note: Please connect target device to power adopter with over 90% battery life.
3. Bump Provisioning Device and Target Device. At Provisioning device, tap screen at Touch to beam.
https://gyazo.com/e4503c14e62306a141cf54b2db104a81
4. Follow the instruction for setup.
5. Tap NEXT when BizGo! MDM app opens
https://gyazo.com/b00510c2e5e149e5e6204f653ff153e7
6. Input Key and Code to enroll to BizMobile Go!.
Tap ENROLL BY QR CODE to use QR code enrollment.
https://gyazo.com/64c1a1df88249f9ed0d410298a9dadc5
7. Check Managed by unit is your unit name and managed type is Device Owner.
https://gyazo.com/b6ed2194394a32be84e84adc469defd5
? Setting Device Owner Mode Using NFC